Store New Arrivals Add to Favorite View Feedback Universal 12V DC Motor Control Radio Remote Control 10A Range 100M 200M Motor Controller Forward+Reverse+Stop Switch Linear Actuators Linear Motor Description Item model number -02

Material Plastic Batteries 1 12V batteries required. Voltage 12 Volts Horsepower 60 Watts Is Discontinued By Manufacturer No Package Dimensions 5.47 x 3.94 x 3.11 inches; 5.57 ounces The motor is not included in the package. / Application: It can be used in rolling blinds, rolling doors, projection screens, awnings, pumps, winches, conveyors or other appliances and equipments with DC motors, it can remote control DC motor rotates in the positive or reversal direction.Wireless control, easy to install. You can rotate a motor in the positive or reversal direction and stop-function with the transmitter (remote control) from any place within a reliable distance.You could turn on / off the receiver with transmitter (remote) from any location within a reliable distance. The wireless radio signals can pass through walls, floors and doors. The remote control has a range up to 100m-200m outdoors.The product uses non-directional radio coding technology. You can use two or more units in the same place. Reliable control: The receiver only works with the transmitter which use same code. One/several transmitters can control one/several receivers simultaneously. So you don’t have to worry about interferenceController power consumption: standby 10mA /working current 35mA. Two control mode can reach your requirement [ Latch (1 key on / other key off)+Momentary (Press and hold -> On; Release -> Off ) Package Include: 1* Receiver (with cover) ; 1* Remote Control (with battery, If you need extra remote control , please tell us. ) The motor is not included in the package. Package Include: 1* Receiver (with cover) 1* Remote Control (with battery, If you need extra remote control , please tell us. )Item specifics Frequency:433 MHz Channel:1 Wireless Communication:RF Use:Auto door, window,lifting equipment,entrance access, up and down controller ,alarm system industrial control and security etc. Product voltage:Dc9v to 12v Product Load:within 60w Output Current ≤10A Frequency:433mhz Remote distance:About 100M-200M(in the open field) Standby current:10mA Working current:35mA Controller size:3.9inch*1.7inch*1.14inch Independent coding, many sets will be not interference of each other Output State: It is adjusted by the Jumper on the Receiver BoardControl mode Description Momentary Press the button▲ , the Motor Forward,Release is Stop. Press the button ▼, the Motor Reverse,Release is Stop.Latched Press the button ▲, the Motor Forward,Press Button ■ is Stop. Press the button ▼, the Motor Reverse,Press Button ■ is Stop.Set control mode Momentary----------Jumper "2&3" Pin Latch----------------Jumper "1& 2" Pinnotice You must turn off the power when you set control mode through jumper Do not overload