PRODUCT DETAILS: Hydro-Cure cartridges are designed to provide high flow rates with minimum pressure drop. These cartridges are used in a wide variety of applications where economical filters are required. Hydro-Cure Cartridges are manufactured on state-of-the-art production equipment using a computer controlled process to ensure reliability and performance. This general-purpose filter fits in most 10" bowl drop-in systems and is used in residential, commercial and food-service applications as a sediment filter or pre-filter.General-purpose spun polypropylene sediment filter cartridgeHigh dirt-holding capacity and superior sediment filtrationMade of polypropylene resin meeting FDA regulation 21CFR177.1520No binders, lubricants or anti-static agents used in manufacturing processDesigned for knife edge seal housings to provide a positive seal without caps or gasketsInterchangeable with most standard pleated, string wound filtersInterchangeable with most standard melt blown cartridgesTemperature range: 40 to 125 FMaterial: 100% pure polypropylene fibers Standard Filter length: 20" (50.8 cm)Filter I.D.: 1 1/16" (2.7 cm)Filter O.D.: 2 1/2" (6.4 cm)Nominal Micron Rating: 25 micronCapacity: 6 months usageTested and certified under NSF/ANSI Standard 42 NOTE: Replace this filter every six (6) months.ALL FILTERS ARE INDIVIDUALLY WRAPPED AND NSF CERTIFIED Copyright, 2009-2024; Discounted Water Filters, Inc, peponlinesales, and all affiliates; All Rights Reserved.